SKG-09
SKG-09 PRODUCT DESCRIPTION This 9mm square insert was specifically designed for machining aerospace components. The 4 cornered inserts are made for cutting Ni-base heat resistant alloys, titanium alloys, and hardened...
MIRROR RADIUS
PRODUCT DESCRIPTION
The Dijet Mirror Radius is the top of the line indexable bull nose on the market. Having a ground screw locating the insert into place provides a high repeatability between indexes. There are two types of inserts with a wide range of diameters and corner radiuses. The neutral geometry has a longer side wiper, while the “high Feed” insert has a helical geometry with a smaller side wiper for less deflection. This insert is for finishing and semi-finishing flat surfaces and side walls. Another advantage is that it can also fit into the Mirror Ball bodies.
INSERTS
RME/RNM
“Neutral” geometry insert with large side wiper.
Insert Sizes: 0.312″ – 1.250″ & 6 MM – 32 MMCorner Radius: 0.15″ – 0.250″ & 0.1 MM – 3.0 MM
Available grades: DH103 JC5015 JC8015 KT9 JC10000
HRE/FRE HRM/FRM
“High Feed” insert with helical geometry and smaller side wiper for less deflection.
Insert Sizes: 0.250″ – 1.000″ & 6 MM – 32 MMCorner Radius: 0.031″ – 0.125″ & 0.3 MM – 3 MM
Available grades: DH102 JC8003 JC8015
BODIES
“STEEL BODY” MIRROR RADIUS END MILLS
INCH Ø: 0.312″ – 1.250″
METRICS Ø: 8 MM – 32 MM
“SOLID CARBIDE” MIRROR RADIUS END MILLS
INCH Ø: 0.312″ – 1.250″
METRICS Ø: 6 MM – 32 MM
MIRROR RADIUS MODULAR HEADS
INCH Ø: 0.500″ – 1.250″
METRICS Ø: 10 MM – 32 MM
SHANKS
Other products
SKG-10
SKG-10 PRODUCT DESCRIPTION The SKG-10 is a high feed cutter that has a low cutting force. The maximum depth of cut on this 10mm square insert is .060”. The square...
SKG-14
SKG-14 PRODUCT DESCRIPTION This 14mm works great for running high feed programs on CAT50 and heavy horsepower machines. Max depth of cut on the insert is .100” and can handle...
Request a Quote
Ready to Work Together? Build a project with us!