SKG-09
SKG-09 PRODUCT DESCRIPTION This 9mm square insert was specifically designed for machining aerospace components. The 4 cornered inserts are made for cutting Ni-base heat resistant alloys, titanium alloys, and hardened...
5 axis barrel tools
Tools
SFSB
This 2 fluted ball is made for finishing hardened materials up to 70 HRC.
SFSB END MILLS
METRICS Ø: 1MM – 12MM
Available grades: DH110
SFSR
This 4 flute variable pitched end mill is designed for milling hardened materials up to 70 HRC
SFSR END MILLS
METRICS Ø: 2MM – 12MM
Available grades: DH110
Corner radius: 0.5MM, 0.8MM, 1MM, 1.1MM, 1.2MM, 1.5MM, 2MM, 3MM
FJVA
This 4 fluted barrel has an outer radius of 250mm. Very good for finishing inclined surfaces.
FJVA END MILLS
outside radius: 250MM
METRICS Ø: 6MM – 12MM
Available grades: DH115
SMHB
This modular ball nose has all 4 flutes come to center so it is truly 4 effective on the tip.
SMHB S-HEAD
METRICS Ø: 16MM – 20MM
Available grades: DH115
LRM
This insert is designed for 5-Axis finishing on gently curved surfaces. Achieved better suface finish compared to the conventional ball. The tool can be tilted up to 10 degrees.
LRM-**0-R*0-BR**
Insert Sizes: 16MM, 20MM, 25MM, 30MM
Available grades: JC8015 DH102
TPM
Indexable barrel insert with tapered shape. This insert has a 400mm and 500mm outer radius grind for larger steps while finishing.
TPM-**0-NR2T30BR*00
Insert Sizes: 16MM – 20MM
Available grades: JC8015 DH102
TNM
This indexable barrel insert is designed to finish on a continuous three-dimensional curved surface. There is a radius on the tip of the tool for picking out any small areas, and a larger radius on the periphery for side finish.
TNM-160-NR6BR32
Insert Sizes: 16 MM & 20 MM
Available grades: JC8015 FZ15
KRM
The KRM insert is very similar to the “Mirror Radius” backdraft that Dijet offers. Rather than having wiper geometry on the periphery of the insert, the KRM has a large radius. This outer radius acts like a barrel tool when tilted parallel to a tapered surface. The KRM is great for applications with a lot of flat surfaces and gradual side wall curvature. The insert fits right into the Mirror Radius body and has excellent repeatability. The side radius allows for larger depths while maintaining a shallow cusp height, therefore, improved efficiency and surface roughness can be achieved.
KRM-***-R10-BR**
16mm bull nose insert with outer “Barrel” radius
Insert Sizes: 16 MM, 20 MM, 25 MM, 30 MM
Corner Radius: 1 MM
Available grades: DH102 JC8015
BODIES
EXSAP-11 END MILLS
INCH Ø: 0.625″ – 1.500″
METRICS Ø: 16MM – 40MM
EXSAP-11 FACE MILLS
INCH Ø: 2.000″ – 3.000″
METRICS Ø: 40MM – 80MM
EXSAP-11 MODULAR HEADS
INCH Ø: 0.625″ – 1.500″
METRICS Ø: 16MM – 40MM
SHANKS
Other products
SKG-10
SKG-10 PRODUCT DESCRIPTION The SKG-10 is a high feed cutter that has a low cutting force. The maximum depth of cut on this 10mm square insert is .060”. The square...
SKG-14
SKG-14 PRODUCT DESCRIPTION This 14mm works great for running high feed programs on CAT50 and heavy horsepower machines. Max depth of cut on the insert is .100” and can handle...
Request a Quote
Ready to Work Together? Build a project with us!