SKG-09
SKG-09 PRODUCT DESCRIPTION This 9mm square insert was specifically designed for machining aerospace components. The 4 cornered inserts are made for cutting Ni-base heat resistant alloys, titanium alloys, and hardened...
FINISH JET MILL
PRODUCT DESCRIPTION
Having a great surface finish with a face mill is particularly important and is done so with the Finish Jet Mill. With a combination of both finishing and roughing cartridges, stable machining can be achieved. When the depth of cut is below 0.1mm, 4 finishing inserts can be used for the best finish. Also, the user can adjust the inserts axially to set the perfect height to adjust face run out. Different cartridges can be used in the same body to hold “backdraft” inserts for finishing side walls.
INSERTS
SPHW1203ZPTR
Roughing insert for stable machining.
Available grades: JC8015
SDHW1504ADEN-W2
Finish insert for hardened die steel.
Available grades: DH103
SDHW1504ADFN-W1
Finishing insert for cast iron and cast steel.
Available grades: DH103
SDHW1504ADEN-F1
Ground insert for face finishing thin plates.
Available grades: DH103 CX75
BODIES
FINISH JET MILL FACE MILLS
INCH Ø: N/A
METRICS Ø: 80 MM – 250 MM
Other products
SKG-10
SKG-10 PRODUCT DESCRIPTION The SKG-10 is a high feed cutter that has a low cutting force. The maximum depth of cut on this 10mm square insert is .060”. The square...
SKG-14
SKG-14 PRODUCT DESCRIPTION This 14mm works great for running high feed programs on CAT50 and heavy horsepower machines. Max depth of cut on the insert is .100” and can handle...
Request a Quote
Ready to Work Together? Build a project with us!