SKG-09
SKG-09 PRODUCT DESCRIPTION This 9mm square insert was specifically designed for machining aerospace components. The 4 cornered inserts are made for cutting Ni-base heat resistant alloys, titanium alloys, and hardened...
MIRROR BALL
PRODUCT DESCRIPTION
The Dijet Mirror Ball is the premier indexable ball nose in the industry. This product has an array of body sizes and insert diameters that cover most materials and reaches. The insert is located by a ground screw that holds it into place providing excellent repeatability. Users can also fit the Mirror Radius bull nose insert into these bodies. When compared to solid carbide end mills, this indexable ball is very cost effective. The tool life is unbeatable and it leaves an incredible surface finish.
INSERTS
MIRROR BALL “A”
Neutral style geometry strictly for finish applications.
Insert Sizes: 6MM – 32MM & .250″ – 1.250″Available grades: DH013 JC5015 JC10000 KT9 JBN245
MIRROR BALL “S”
Helical geometry makes this the best insert for high-temp alloys and aluminum.
Insert Sizes: .250″ – 1.250″ & 6 MM – 32 MMAvailable grades: JC8008 JC20003 FZ05
MIRROR BALL “SS”
Sharp helical geometry good for finishing and semi finishing hard materials.
Insert Sizes: 6 MM – 30 MMAvailable grades: DH108
MIRROR BALL “SSR”
Sharp helical geometry with 200° range for under cutting. Similar geometry as the “SS”.
Insert Sizes: 8MM – 30MMAvailable grades: DH108
MIRROR BALL “TG”
Negative helical geometry is good for finishing hard material/weld up to 60 HRC.
Insert Sizes: 0.375″ – 1.000″ & 6 MM – 32 MMAvailable grades: DH102
MIRROR BALL “TS”
Good for semi finishing hard materials up to 60 HRC.
Insert Sizes: 16 MM – 30 MMAvailable grades: DH202
MIRROR BALL “GRM”
Mirror insert with no tip allows for larger step overs. This fits into the Mirror Ball body.
Corner Radius: 5MM, 6MM, 8MM, 10MMAvailable grades: DH102 JC8015 JBN245
BODIES
“STEEL BODY” MIRROR BALL END MILLS
INCH Ø: 0.250″ – 1.250″
METRICS Ø: 6 MM – 32 MM
“SOLID CARBIDE” MIRROR BALL END MILLS
INCH Ø: 0.250″ – 1.000″
METRICS Ø: 6 MM – 32 MM
MIRROR BALL MODULAR HEADS
INCH Ø: 0.500″ – 1.250″
METRICS Ø: 10 MM – 32 MM
SHANKS
Other products
SKG-10
SKG-10 PRODUCT DESCRIPTION The SKG-10 is a high feed cutter that has a low cutting force. The maximum depth of cut on this 10mm square insert is .060”. The square...
SKG-14
SKG-14 PRODUCT DESCRIPTION This 14mm works great for running high feed programs on CAT50 and heavy horsepower machines. Max depth of cut on the insert is .100” and can handle...
Request a Quote
Ready to Work Together? Build a project with us!