EXSAP 11 PRODUCT DESCRIPTION This 11mm double sided insert has 4 positive cutting edges. The unique design of the arc geometry on the periphery of the inserts has a G-class grind that gives this tool performance benefits of roughing and semi-finishing. Great for face milling and side milling a broad spectrum of materials. The -SL …
EXSAP-17 PRODUCT DESCRIPTION This 17mm double sided insert has 4 positive cutting edges. The thought-out design of the pocket seating gives the insert maximum reinforcement. The unique design of the arc geometry on the periphery of the inserts has a G-class grind that gives this tool performance benefits of roughing and semi-finishing. Great for face …
EXSKS-09 PRODUCT DESCRIPTION The SKS Extreme holds a unique high feed geometry insert. This double-sided trigon has 6 cutting edges for reducing cost per index. The insert has a chip breaker in order to be free machining and is capable of machining a variety of materials. The maximum depth of cut on this thick insert …
EXSKS-07 (MULTI-EXTREME – HF) PRODUCT DESCRIPTION **Multi Extreme – HF will be changing name to EXSKS-07** It is called the “Multi Extreme” for a reason. This double-sided trigon insert has multiple uses. Not only is it a high feed insert, but it can also be used as a 90-degree square shoulder. The maximum depth of …
EXSKS 05 PRODUCT DESCRIPTION New EXSKS series: EXSKS-05 type is called “KATANA”. Inspired by the Japanese Samurai sword, “KATANA” is named for its ability to smoothly cut through workpieces just like butter. It has unique and firm clamping system with 3D geometry insert and M3 size screw, performs maximum depth of cut when high feed …
SKG-14 PRODUCT DESCRIPTION This 14mm works great for running high feed programs on CAT50 and heavy horsepower machines. Max depth of cut on the insert is .100” and can handle large chip loads. The bodies range from 2”-6” all taking the same size insert. There are geometries and grades for most steels and stainless. This …
SKG-10 PRODUCT DESCRIPTION The SKG-10 is a high feed cutter that has a low cutting force. The maximum depth of cut on this 10mm square insert is .060”. The square geometry will help achieve high metal removal rates while maintaining a minimal spindle load. This cutter is good for a wide range of steel and …
SKG-09 PRODUCT DESCRIPTION This 9mm square insert was specifically designed for machining aerospace components. The 4 cornered inserts are made for cutting Ni-base heat resistant alloys, titanium alloys, and hardened stainless steels. These fine pitched pockets allow a high number of teeth for faster feed rates. Also, the inserts are ground in order to achieve …